What are the four main points to pay attention to when using a horizontal machining center
A horizontal machining center is a machining center where the worktable and the spindle are set in parallel. A horizontal machining center usually has three linear motion coordinate axes plus a work...
2022-11-30
The drilling and tapping machine adopts numerical control system, which is not easy to damage the drill bit
The operation of the drilling and tapping machine is very simple, and there are many skills to use it. The drilling and tapping machine transmits lubricating oil to its motor through a duplex, and f...
2022-11-23
After the operation of the CNC machining center is completed, what else needs to be done?
After the cnc machining center has completed the operation, there are some things that must be done. These matters may not seem worth mentioning on the surface, but the collapse of high-rise buildin...
2022-11-16
Important factors of CNC machine tool spindle
Machine tool spindle refers to the axis on the machine tool that drives the workpiece or tool to rotate. The main shaft is usually composed of the main shaft, bearing and transmission parts (gear or...
2022-11-09
In-mold tapping machine is the main development direction of domestic mold industry automation
The in-mold tapping machine is installed at a specific position on the mold, which converts the up and down motion of the punch into rotary motion, and completes the tapping action during the openin...
2022-11-04
