After the CNC machining center completes the operation, there are some things that must be done. These matters may seem insignificant on the surface, if the CNC machining center completes the operation without subsequent work. This is very unfavorable for mechanical equipment. This article will talk about what work needs to be done after the CNC machining center completes its operation?
1： After processing the entire batch of workpieces, the tool number and the tool compensation value should be checked to ensure that the tool number and tool compensation value in the program offset information page, adjustment card, and process card are completely inconsistent; When selecting and reusing cutting tools, the tool should be re aligned on the tool alignment instrument, which can effectively reduce the impact of tool material wear on the workpiece during the machining process;
2： From the magazine, press to remove the tool or adjust the card program to clean the number storage. Disk technology, tools will adjust card storage;
3： When removing fixtures, certain design fixtures should record the installation location and orientation, and make their own records for archiving;
4： Stop the axis in the middle;
5： To shut down, press the shutdown button on the operation panel and wait for the spindle cooling oil to return before automatically shutting down.
|
