Reasonable design of Faucet Making Machine:
1. Multiple heads can be customized according to product processing requirements. Avoid wasting time when changing tools, and complete drilling, tapping and chamfering in one machine.
2. The open worktable structure is convenient for customers to load and unload materials, multi-station processing, and save downtime for material change. Multiple interfaces can be reserved, and how the tooling is started and in what order is all set by the customer.
3. The two ends of the sink are open: the standard models are designed as semi-closed sinks. If the customer wants to save costs, increase the waste of travel, and cannot put the product without adding it. It can be considered that the two ends of the standard model are slotted, and the product can stick out of the workbench. In this way, unnecessary costs can be reduced under the condition that it can be processed.
What are the detailed workflows of the Faucet Making Machine?
1. According to the size of the processing, the number of processing holes, the size of the processing holes, the position data of the processing holes, etc., make the fixing fixture. The reason for the deviation of the CNC drilling machine is the rotation speed of the hot melt drill: the drilling tip of the blocking drilling machine is worn or the spring is slack and weak. Fasten the clamp and automatic turntable.
2. Set the processing data in the control computer.
3. Fix the material to be processed on the automatic turntable.
4. Start the machine, and the machine can complete the processing procedures such as punching, drilling, milling, through-hole, blind hole, multi-hole, high and low holes at one time according to computer instructions and processing data.
5. After a hole is processed, the automatic drill plate will rotate a certain angle according to the set program, align the position of the next processing hole with the processing head, and restart processing. When the entire turntable is fully processed, the one-time processing process is completed. Remove the processed material. Reload.
6. In the process of processing, if there is a material jam or lack of material, the machine will immediately alarm and stop working, waiting for processing.
7. During the processing, when the processing tool head is not sharp, the machine will also immediately alarm to notify the replacement of the tool.
|
