If the tool sleeve of the drilling and tapping machine is broken, the reason may be that the tool sleeve collides with the loaded tool before chamfering or after rotating the tool head. The solution is to adjust the position of the cutter head near the switch or the position of the cylindrical spring switch. Replace the tool sleeve.
The motor failure of drilling and tapping machine may be caused by insufficient power supply or incorrect voltage, brake failure, overweight tools, component failure, etc. The solution is to check whether the contact is damaged. Whether the power supply of CNC gantry drilling and tapping machine is lost and whether the voltage level matches; Check whether the brake coil is damaged and whether the grounding is correct; Check whether the tool quality exceeds the allowable value; Check whether the sliding part is smooth.
As a processing instrument with complex internal structure and excellent design, gantry drilling and tapping machine machining center is an instrument needed for processing many parts of electronic products, and also an indispensable tool in today's industrial equipment. Its price ranges from tens of thousands to hundreds of thousands. Therefore, it is necessary for us to know some maintenance methods of gantry drilling and tapping machining center.
Maintenance Method of Gantry Drilling and Tapping Machining Center
In fact, the main maintenance method of gantry drilling and tapping machining center is its cleaning method. If you can correctly master its cleaning method, its service life will become very long. Be sure to add the correct detergent when cleaning. That is neutral detergent, which is easily ignored by many people.
Although the above methods can help prolong the service life of the gantry drilling and tapping machining center. Make the internal parts have a longer service life, but the above cleaning methods are not professional after all. So they should go to a professional manufacturer for maintenance as often as possible. A month or two can greatly extend the service life.
In the operation of the Xiaolongmen drilling and tapping machine, there will always be a problem with different meanings. How to operate the small portal drill and tap machine, how to operate the small portal drill and tap machine, and what should be paid attention to in the process of operating the small portal drill and tap machine. It is a problem that every operator needs to pay attention to.
1. Before using the small gantry drilling and tapping machine required manually. Operators shall receive systematic learning and training and be familiar with the structure and characteristics of CNC machine tools.
2. The operator shall wear labor protection articles as required, and it is prohibited to wear gloves to operate the small gantry drilling and tapping machine.
3. The operator shall add lubricating oil, hydraulic oil and cutting oil according to the specifications of the small gantry drilling and tapping machine.
4. Before starting the small gantry drilling and tapping machine, be sure to check whether the CNC machine tool components are complete and whether the buttons can reset automatically.
5. When the operator is connected to the power supply, the main power supply of the Xiaolongmen drilling and tapping machine shall be connected to the numerical control power supply, but the power supply shall be cut off in turn.
6. The Xiaolongmen drilling and tapping machine needs to restore the axis to the original operating state after power on, and then enter other operating modes to ensure the correctness of the coordinates of each axis.
7. Before processing the parts of the small gantry drilling and tapping machine, be sure to close the protective door. When the program runs normally, it is forbidden to open the protection door.
8. In the small gantry drilling and tapping machine, the operator is forbidden to open and touch the parts with lightning marks on the CNC machine tool to avoid electric shock. This process must be strictly checked before operation.
|
